ASME SA210 Grade C Seamless medium-carbon steel boiler and superheater tubes

Standard: ASTM A210 / ASME SA210

Steel grade: medium-carbon steel

Material shall conform to the applicable requirements of specification A450/A450M

Process: cold drawn

The tubes cover minimum wall thickness

Application: seamless boiler tubes and boiler flues, arch and stay tubes and superheater tubes.

Dimensional range:

OD: 12.7-76.2mm

Any specific size is to be discussed before offer

The tube be 100% eddy current tested

Ultrasonic test is as option

Straightness ≤1mm/1000mm

Roughness: Ra ≤0.8

Test

• The tubes shall have a hardness test, it is not exceeding 79HRB or 143 HB for Grade A1, 89HRB or 179 HB for Grade C.
• One tension test shall be made on a specimen for lots of not more than 50 tubes. Tension tests shall be made on specimens from two tubes for lots of more than 50 tubes.
• One flattening test shall be made on specimens from each end of one finished tube from each lot, but not the one used for the flaring test.
• One flaring test shall be made on specimens from each end of the one finished tube from each lot, but not the one used for the flattening test.
• Brinell or Rockwell hardness tests shall be made on specimens from two tubes from each lot.
• Each tube shall be subjected to the hydrostatic test, or, instead of this test, a nondestructive electric test may be used when specified by the clients.

Mechanical properties

Tubes shall be delivered with square cut ends. The ends are free of excessive burrs.

The tubes are bundled in the waterproof plastic sheet and packed in the wooden cases

The case is most suitable for hanging by forklift.

EN10204-3.1 MTC shall be issued

EN10204-3.2 MTC is as option